108
Navigation operation
Setting the time
In order to achieve correct navigation on routes requiring
guidance under time restrictions and to calculate the estimat-
ed time of arrival, it is necessary to set the GMT time trans-
mitted from satellites to the current time zone.
Select
TIME
in the system settings menu and confirm.
Using the multifunction button
the time can be
changed from the 24 hour to the 12 hour display.
Using the multifunction buttons
or
the time is
changed every half an hour.
By pressing the SELECT control or the multifunction button
the time set is accepted.
The program returns to the system settings menu.
Saving the position
Select
SAVE POSITION
in the system settings menu and con-
firm.
The current co-ordinates (degrees of longitude and latitude)
for the position are displayed.
Confirm again by pressing the SELECT control.
Enter the name of the position.
Press the SELECT control for more than 2 seconds to confirm
the name entered. To confirm, the small tick
can also be
marked and the SELECT control briefly pressed.
The destination memory is automatically requested
(see page 104).
Select the desired position in the destination memory using
the SELECT control and press to confirm.
DURATION
T I M E
SAVE POSITION
T I M E : 1 1 : 3 0 P M
03.03.1999
24H +
. !PL
24H
T I M E : 1 1 : 3 0 P M
03.03.1999
24H +
. !PL
+
.
PL
TIME
S A V E P O S I T I O N
LANGUAGE*
11:38.34E 54:49.14N
P O S I T I O N
SAVE
NAME:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
#$" !
0123456789,/() .
7890_GB.book Seite 108 Montag, 1. Juli 2002 1:20 13
