Sony MDS-JE470 - Md Player Operating Instructions Manual Download | Manualshive

Page: 2 / 48

background image

masterpage:Left

(3 column)

filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB02REG-
U2.fm]

2

model name1[MDS-JE770] model name 2 [MDS-JE470]

[4-233-926-12(1)]

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

To prevent fire, do not Cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.

This appliance is classified
as a CLASS 1 LASER
product.
This label is located on the
rear exterior.

The following caution label is located inside the
apparatus.

Don’t throw a battery, dispose it as
the injurious wastes.

For customers in the U.S.A.

This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.

This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

CAUTION

You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.

WARNING

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and

receiver.

— Connect the equipment into an outlet on a circuit

different from that to which the receiver is
connected.

— Consult the dealer or an experienced radio/TV

technician for help.

E

NERGY

S

TAR

®

is a U.S.

registered mark.
As an

E

NERGY

S

TAR

®

Partner,

Sony Corporation has determined
that this product meets the

E

NERGY

S

TAR

®

guidelines for

energy efficiency.

WARNING

IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.

«
1
2
3
4
...
»

Summary of Contents for MDS-JE470 - Md Player

















































Reviews:

No comments

Related manuals for MDS-JE470 - Md Player

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

SLS232C - PORT. COMPACT DISC

Brand: Panasonic Pages: 8

Diga DMR-EZ47VEB

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Califone Pages: 16

Brand: Bang & Olufsen Pages: 12

My Music Player

Brand: I.D. AL Pages: 2

Brand: Mystery Pages: 36

Brand: MPMan Pages: 34

Brand: Coby Pages: 19

Brand: Nikkei Pages: 12

Brand: Numark Pages: 6

Brand: Pyle Pages: 2

BrightSign MH6-HD

Brand: Audio Authority Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands