Changing the pitch/Fading in and fading out
40
GB
O
the
r Func
tions
1
While the deck is playing, press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until
“Pfine” appears, then press AMS or YES.
3
Turn AMS (or press
.
/
>
repeatedly) until the
desired value appears, then press AMS or YES.
4
Press MENU/NO.
To recall the factory setting
Press CLEAR while setting the value.
Notes
•
The playing sound drops out momentarily when you change
the fine control value.
•
The fine control value reverts to “0.0%” (factory setting) when
you turn off the deck or eject the MD.
•
The step and fine control values are linked; changing one value
also changes the other.
Fading in and fading out
You can use Fade-in Play to gradually increase the signal
level to the ANALOG OUT jacks and the PHONES jack
at the start of playing. Fade-out Play gradually decreases
the signal level at the end of playing.
Fade-in Recording gradually increases the signal level at
the start of recording. Fade-out Recording gradually
decreases the signal level at the end of recording.
Note
The level of the signal output from the DIGITAL OUT connector
does not change during Fade-in Play nor Fade-out Play.
During play pause (for Fade-in Play) or recording
pause (for Fade-in Recording), press FADER.
b
flashes in the display and the deck performs Fade-in
Play or Fade-in Recording for five seconds (factory
setting) until the counter reaches “0.0s.”
During play (for Fade-out Play) or recording (for Fade-
out Recording), press FADER.
B
flashes in the display and the deck performs Fade-out
Play or Fade-out Recording for five seconds (factory
setting) until the counter reaches “0.0s,” then pauses.
Fade-in Play and Fade-in Recording
Fade-out Play and Fade-out Recording
Z
FADER
>
.
X
H
X
` / 1
Z
x
.
>
m
M
