23
GB
Pla
y
ing
M
D
s
Playing an MD
Playing MDs
This chapter explains the various ways
to play MDs.
Playing an MD
1
Turn on the amplifier and select MD on the
amplifier.
2
Press
?/1
to turn on the deck.
The STANDBY indicator turns off.
3
Insert an MD.
4
If necessary, turn AMS (or press
>
repeatedly) to
locate the track you want to start playing from.
If you want to play from the first track, skip this step
and go to step 5.
5
Press
H
.
The deck starts to play.
6
Adjust the volume on the amplifier.
Operations you may want to do during play
z
When you play an MD recorded in LP2 or LP4 Stereo
mode
The MD LP indicator lights up when you press
H
in step 5
above.
z
To use headphones
Connect them to the PHONES jack. Turn PHONE LEVEL (or
press REC LEVEL/ANALOG OUT LEVEL +/– repeatedly) to
adjust the volume.
z
You can adjust the analog signal level output to the
ANALOG OUT jacks and the PHONES jack
1
While the deck is playing, press DISPLAY/CHAR (or
DISPLAY) repeatedly until the line output adjustment display
appears.
2
Press REC LEVEL/ANALOG OUT LEVEL +/– on the
remote repeatedly to adjust the output signal level.
To
Press or turn
Stop play
x
Pause play
X
Resume play after pausing
H
or
X
Locate a succeeding track
AMS clockwise (or press
>
repeatedly)
Locate the beginning of the
current track or a preceding
track
AMS counterclockwise (or
press
.
repeatedly)
Eject the MD
EJECT
A
after stopping play
H
?/1
AMS
