Sony MDS-DRE1 Service Manual Download

Page: 12 / 77

– 12 –

SECTION 4

TEST MODE

4-4. Selecting the Test Mode

Eight test modes are selected by turning the

[AMS]

knob.

Function

[AMS]

knob

[ENTER/YES]

button

[EDIT/NO]

button

4-1. Setting the Test Mode

Press

[ ]

(POWER) switch while pressing the

[AMS]

knob to turn POWER ON.

4-2. Exiting the Test Mode

Press the

[REPEAT]

button. Unplug the power plug from an outlet.

4-3. Basic Operations of the Test Mode

All operations are performed using the

[AMS]

knob,

[ENTER/YES]

button, and

[EDIT/NO]

button.

The functions of these buttons are as follows.

Contents

Changes parameters and modes

Proceeds onto the next step. Finalizes input.

Returns to previous step. Stops operations.

Contents

Temperature compensation offset adjustment

Laser power adjustment

Traverse adjustment

Focus bias adjustment

Focus bias check

Continuous playback mode

Continuous recording mode

Non-volatile memory mode *

Display

TEMP ADJUS

LDPWR ADJUS

EFBAL ADJUS

FBIAS ADJUS

FBIAS CHECK

CPLAY MODE

CREC MODE

EEP MODE

For detailed description of each adjustment mode, refer to 5. Electrical Adjustments.
If a different adjustment mode has been selected by mistake, press the

[EDIT/NO]

button to exit from it.

* The EEP MODE is not used in servicing. If set accidentally, press the

[EDIT/NO]

button immediately to exit it.

4-4-1. Operating the Continuous Playback Mode

1. Entering the continuous playback mode

Set the disc in the unit (either MO or CD).(MO: Recordable disc, CD: Disc for playback only)

Rotate the

[AMS]

knob and display “CPLAY MODE”.

Press the

[ENTER/YES]

button to change the display to “CPLAY IN”.

When access completes, the display changes to “C1 =

AD =

”.

Note:

The “ ” displayed are arbitrary numbers.

2. Changing the parts to be played back

Press the

[ENTER/YES]

button during continuous playback to change the display to “CPLAY MID”, “CPLAY OUT”.

When pressed another time, the parts to be played back can be changed.

When access completes, the display changes to “C1 =

AD =

”.

Note:

The “ ” displayed are arbitrary numbers.

3. Ending the continuous playback mode

Press the

[EDIT/NO]

button. The display will change to “CPLAY MODE”.

Press the

[ EJECT]

button and remove the disc.

Note 1:

The playback start addresses for IN, MID, and OUT are as follows.

40h cluster

MID

300h cluster

OUT

700h cluster

Summary of Contents for MDS-DRE1














































































Search results

Summary of Contents for MDS-DRE1

Reviews:

Related manuals for MDS-DRE1

Brands by name

Popular brands

Sony MDS-DRE1, Service Manual

Search results

Summary of Contents for MDS-DRE1

Reviews:

Related manuals for MDS-DRE1

Brands by name

Popular brands