Chapter 5 Playback
Chapter 5
Playback
5-3
5-2-3 Playing a Single Track Only
In single-track-playback mode, the MD deck plays
only single track that you have selected. This prevents
unintentional playback of the next track.
In single-track-playback mode, the MD deck stops
when track playback ends, even if AUTO PAUSE or
AUTO CUE has been selected.
To select single-track-playback mode
Press the SINGLE button.
“1” appears in the display window.
To turn off single-track-playback mode, press the
SINGLE button again.
5-2-4 Rehearsal Playback
Press the REHEARSAL button to play back a portion
of a track repeatedly. The rehearsal playback allows
you to accurately position a cue point or edit point.
Pressing the CUE STDBY or EDIT/NO button sets the
cue point or edit point.
If you press the REHEARSAL button during
playback
The MD deck plays the track starting from the point at
which you pressed the REHEARSAL button.
If you press the REHEARSAL button while the
MD deck is stopped
The MD deck locates the first track on the MD or the
beginning of the track you selected.
To change the playback portion during
rehearsal playback
Turn the AMS control.
You can change the time unit for adjusting the start of
rehearsal playback by pressing the
0/)
buttons.
When you press the
0
or
)
button, the time unit
flashes. Each press of the
0
button selects the next
time unit: “F (frame)”, “S (second)”, “M (minute).”
And each press of the
)
button selects the unit in
reverse direction.
To turn off rehearsal playback
Press the REHEARSAL button again.
Use the Setup menu to set the duration for rehearsal
playback and the interval between repetitions.
See “7-7 Setting the Rehearsal Playback Function” on page
7-7.
p
(P
0
)
=
+
r
SINGLE button
Time information
p
(P
0
)
=
+
r
“1” (single-track-playback) indication
REHEARSAL button
