Sony Mavica MVC-FD83, Service Manual, Page: 63 / 113

5-9
1-2. INITIALIZATION OF B, D, E, F PAGE DATA
1-2-1. Initialization of D Page Data
1. Initializing the D Page Data
Note:
If the D page data has been initialized, the following ad-
justments need to be performed again.
1) Modification of D page data
2) LCD system adjustments
3) Battery end adjustments
Adjustment Page D
Adjustment Address 10 to FF
Initializing Method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 03, and set data: 02.
3) Select page: 2, address: 00, and set data: 2D.
4) Select page: 2, address: 01, set data: 2D and press the PAUSE
button of the adjusting remote commander.
5) Select page: 2, address: 02, and check that the data changes to
“01”.
6) Perform “Modification of D Page Data”
2. Modification of D Page Data
If D Page data has been initialized, change the data of the “Fixed
data-2” address shown in the following tables by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the this unit
may not operate.
3) When changing the data, press the PAUSE button of the ad-
justing remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of D Page data
1) Select page: 2, address: 00, and set data: 29.
2) Select page: 2, address: 01, and set data: 29, and press the
PAUSE button of the adjusting remote commander.
3. D Page Table
Note 1:
Fixed data-1: Initialized Data. (Refer to “1. Initializing
the D Page Data”)
Fixed data-2: Modified Data. (Refer to “2. Modification
of D Page Data”)
Address Initial Remark
Value
FD83 FD88
10 00 00 Test mode
11 to 16 Fixed data-1 (Initialized data)
17 Fixed data-2
18 to 22 Fixed data-1 (Initialized data)
23 Fixed data-2 (FD83)
Fixed data-1 (Initialized data) (FD88)
24 to 27 Fixed data-1 (Initialized data)
28 Fixed data-2 (FD83)
Fixed data-1 (Initialized data) (FD88)
29 to 2F Fixed data-1 (Initialized data)
30 80 80 Battery down adj.
31 88 88
32 AD AD
33 C2 C2
34 CD CD
35 to 37 Fixed data-1 (Initialized data)
38 Fixed data-2
39
3A
3B
3C Fixed data-1 (Initialized data)
3D Fixed data-2
3E
3F
40
41
42, 43 Fixed data-1 (Initialized data)
44 Fixed data-2
45
46
47 to 7F Fixed data-1 (Initialized data)
80 BB BC Bright Adjustment (LCD)
81 6F 80 Color Adjustment (LCD)
82 77 B9 White Balance Adjustment (LCD)
83 7A B7
84 DB BE Contrast Adjustment (LCD)
85 78 C8 D Range Adjustment (LCD)
86 70 7C V-COM Level Adjustment (LCD)
87 6F 50 VCO Adjustment (NTSC) (LCD)
88 97 74 V-COM Adjustment (LCD)
89 Fixed data-2
8A,8B Fixed data-1 (Initialized data)
8C Fixed data-2
8D 6F 50 VCO Adjustment (PAL) (LCD)
8E Fixed data-2
8F
90 to C2 Fixed data-1 (Initialized data)
C3 Fixed data-2
C4 to FF Fixed data-1 (Initialized data)
Table. 5-1-3