5-4
HVL-MT24AM
5-2.
INITIALIZATION OF EEPROM (WRITING OF INITIAL VALUE)
Note:
When replacing the PC board set, A, perform the EEPROM initialization before any adjustment.
If dialog box of error code appears during the initialization, check the reason of error referring to page 5-12.
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Flash Adjustment Program
Note:
Flash Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1)
Connect the checking flash to the camera.
2)
Start the flash adjustment program “FlashAdjustment.exe” referring to “5-1-3. Flash Adjustment Program”.
Fig. 5-2-1
2. Initializing Method
1)
Select the “HVL-MT24AM/Macro Controller” from the pull down menu of the flash adjustment program, then click the
[Connect]
button.
Note:
Click the
[End]
button to terminate the flash adjustment program.
Fig. 5-2-2
2)
When checking message window “You select HVL-MT24AM/Macro Controller” appears, click the
[Yes]
button.
Fig. 5-2-3
3)
When adjustment menu window appears, click the
[EEP Initialize]
button.
Note:
Click the
[Exit]
button to disconnect the USB connection of PC.
Fig. 5-2-4