Sony LSPX-S2 Help Manual Download

Page: 15 / 105

Hint

To disconnect the BLUETOOTH connection, touch the N-marked part of the speaker with the N-marked part of the device again.

If you cannot connect the speaker, try the following.

Move the device over the N-mark part of the speaker slowly.

If the device is in a case, remove the case.

If you touch a device on the speaker, the device terminates the BLUETOOTH connection with the current device (NFC
compatible headset, etc.), and connects with the speaker.

Note

To output music from a BLUETOOTH device with the connection cord still in the AUDIO IN jack, either press the BLUETOOTH/

PAIRING button on the bottom of the speaker or use Sony | Music Center to switch to the music that you want to use for

play back.

If your device is a type that goes into standby mode in response to magnetic force, it may not be able to be connected by NFC.

When using the Speaker Add function, pair with the speaker that was set as the master unit. The satellite unit cannot be paired
with.

Terminating the BLUETOOTH connection (after use)

Summary of Contents for LSPX-S2






































































































Search results

Summary of Contents for LSPX-S2

Reviews:

Related manuals for LSPX-S2

Brands by name

Popular brands

Sony LSPX-S2, Help Manual

Search results

Summary of Contents for LSPX-S2

Reviews:

Related manuals for LSPX-S2

Brands by name

Popular brands