32
Auto:
The format and scan mode are
displayed temporarily when the
content of Status Display is
changed.
On:
The format and scan mode are
always displayed.
Off:
The format and scan mode are not
displayed.
Notes
Even if “Status Display” is set to
“Auto” or “Off,” the flip pattern is
always displayed.
For details about the signal format,
refer to no signal and non
compatible signal displays.
2D/3D Display
Select the display method of OSD to
show the currently set display method
from among 2D, 3D, or 3D to 2D
Convert.
Auto:
The method is displayed for about 3
seconds after the status of 2D, 3D,
or 3D to 2D Convert is changed, or
when Status Display is displayed.
On:
The method is always displayed.
Off:
The method is not displayed.
Menu
Setting
Select Port
Input Connector Name
Control Lock
Signal Format
Flip Pattern
PIP/POP Mode
Scan Size/
4K Zoom
Energy Saving Mode
A.I.M.E.
2D/3D Display
Input
Signal format
display
No signal
No Sync
Non compatible
signal (except for
DVI-D)
Unknown
Non compatible
signal (DVI-D)
Out Of Range
A.I.M.E. Display
On:
Always displayed while the A.I.M.E.
function is activated.
Off:
Not displayed.
Language
You can select the menu or message
language from the following
languages.
English: English
: Chinese
: Japanese
Italiano: Italian
: Spanish
Deutsch: German
: French
Power On Setting
Power On Mode
Select the setting when the monitor is
turned on from the following settings.
Last:
The setting when the monitor was
last turned off.
Default Setting:
The setting that is set in the default
setting.
User1 - 20:
The selected user setting.
Logo
Select the logo display when the
power turns on, from “Off,” “On -
5sec,” or “On - 10sec.”
A.I.M.E. Boot
Select the A.I.M.E. setting configured
when the monitor is turned on from
the following.
Off:
The monitor is turned on with the
A.I.M.E. setting “Off.”
Last:
The setting when the monitor was
last turned off.
Power Save
Energy Saving
Mode
Select the energy saving mode from
the following options.
Off:
Turns the energy saving mode off.
On:
Dims the backlight.
Sleep Mode
Sets the sleep mode to “Off” or “On.”
When you set to “On,” the monitor
enters into power saving mode by
turning off the backlight if there is no
input signal from the selected
connector for more than 1 minute.
Serial Remote
Serial Remote
Selects the using mode.
Off:
Inactivates the serial remote
function.
RS-232C:
Controls this unit via RS-232C
command.
Ethernet:
Controls this unit via Ethernet
command.
Menu
Setting
Summary of Contents for LMD-XH550MT
Page 43: ......
