Sony LMD-152C, Operating Instructions Manual

Page: 5 / 16

Features
5
Side
Notes
• The LCD display unit has a built-in cooling fan. If
“FAN ERROR (MEU)” or “FAN ERROR (LMD)” is
displayed on the screen, turn the power off and consult
with qualified Sony personnel.
• If a snowy picture appears when a computer signal is
input, change a value of the vertical refresh rate.
• Changes in room temperature sometimes make the
cabinet expand or contract, causing a noise. This
does not indicate a malfunction.
• The LCD display unit is designed for use with
MEU-WX2.
• Clean the rear cover area of the LCD display unit
regularly.
Dust in the rear cover area may cause a problem
with the cooling system of the LCD display unit.
• When the display unit is turned on at a low
temperature, an approximately 1-hour warming-up
period may be required to obtain stable brightness
of the whole screen (for the LMD-212C only).
Features
The LMD-172WC is a 17-type, the LMD-232WC is a
23-type and the LMD-322WC is a 32-type wide-screen
LCD display unit, and the LMD-152C is a 15-type and
the LMD-212C is a 21-type 4:3 LCD display unit.
High brightness LCD panel
Because of the display unit’s high brightness, high
contrast, high speed response, and wide viewing angle
technology, it can be used under various lighting
conditions.
Rack mount display units (LMD-152C,
LMD-172WC and LMD-212C only)
The LMD-152C/172WC/212C can be installed in a
standard 19-inch rack using each optional Mounting
Bracket MB-524, MB-522A or MB-523. This is
essential when space is paramount in crowded OB
vehicles.
Optional monitor stand with tilt function
The LMD-152C/172WC/232WC/212C can be installed
on the optional SU-558 monitor stand, and the LMD-
322WC on the optional SU-559 floor stand. Thanks to
the tilt and height adjustment functions of the SU-558
monitor stand, the display screen height is adjustable to
position with other equipment.
Lightweight, thin design
The lightweight, thin design reduces the load for an OB
vehicle and the space needed for installation.
3-color tally lamp (except for the LMD-
322WC)
The tally lamp lights in red, green or amber to monitor
each input picture and check the on-air mode.
1.2
Unit: cm