background image

57

US

Ad
di

ti

on
al

 I

n

fo

rmati

o

n

Protected!

The USB device is write-protected.

Push STOP!

You tried to perform an operation that can 
be performed only when the playback is 
stopped.

REC Error!

Recording did not start, stop halfway or 
otherwise could not be performed 
(page 52).

Removed

The USB device has been removed.

Step Full!

You tried to program more than 25 tracks 
(steps).

Track Full!

You cannot record onto the USB device 
because the number of track has reached 
its maximum.

Folder Full!

You cannot record onto the USB device 
because the number of folder has reached 
its maximum.

Device Full!

The memory of the USB device is full.

Precautions

Discs that this system CANNOT play 
back

• Discs of non-standard shape (for example, 

heart, square, star).

• Discs that have adhesive tape, paper, or 

sticker attached to them.

• Rental or used discs with attached seals where 

the glue extends beyond the seal.

• Discs that have labels printed using ink that 

feels tacky when touched.

Notes on discs

• Before playing, wipe the disc with a cleaning 

cloth from the center out to the edge.

• Do not clean discs with solvents, such as 

benzine, thinner, or commercially available 
cleaners or anti-static spray intended for vinyl 
LPs.

• Do not expose discs to direct sunlight or heat 

sources such as hot air ducts, nor leave it in a 
car parked in direct sunlight.

On safety

• The system is not disconnected from the AC 

power source (mains) as long as it is 
connected to the wall socket, even if the 
system has been turned off.

• Completely disconnect the power cord (mains 

lead) from the wall socket (mains) if it is not 
going to be used for an extended period of 
time. When unplugging the unit, always grip 
the plug. Never pull the cord itself.

• Should any solid object or liquid get into the 

system, unplug the system, and have it 
checked by qualified personnel before 
operating it again.

• For customers in United States

One blade of the plug is wider than other for 
the purpose of safety and will fit to the wall 
outlet only one way. If you are unable to insert 
the plug fully into the outlet, contact your 
dealer.

• The AC power cord can be changed only by a 

qualified service facility.

Continued

l

Summary of Contents for LBT-ZUX9 - Mini Hifi Component

































































Reviews: