77
GB
Oth
e
r Op
er
atio
ns
To switch between the “TV” and
“SAT” function
Use the buttons on the unit for the
operation.
Hold down TV/SAT and press
"/1
while
the system is turned on. Release
"/1
first,
then release TV/SAT. The system
switches the function from “TV” to
“SAT” or vice versa.
Note
If the sound is distorted or too loud when “TV”
is selected, change the function to “SAT”.
Listening to a connected VCR
Press FU/– repeatedly to
select “VIDEO” (or press VIDEO on the
unit) and start playing the connected
VCR.
Note
The video signal from the connected VCR is
only output through the VIDEO OUT jack of
this unit.
Recording the audio and video
signals from a VIDEO CD onto a video
tape
1
Connect an audio cord (not
supplied) from the AUDIO OUT
jacks and the supplied video cord
from the VIDEO OUT jack to the
audio and video input jacks of your
VCR.
2
Start recording.
Refer to the operating instructions
provided with connected component.
Note
The audio signal from the AUDIO OUT jacks
may cut off for a moment during some
operations such as when you press SOUND
FIELD, AUDIO or KARAOKE MODE.