24
GB
C
MD (VIDEO) IN L/R jacks
Use audio cords (not supplied) to connect an
optional component (such as an MD deck or a
VCR) to these jacks. You can then record or
listen to analogue audio from that component
through this system.
D
VIDEO OUT jack
Use a video cord (not supplied) to connect an
optional component (such as a TV) to this jack.
You can then output video to that component
from the connected video game through this
system.
E
PHONO IN L/R jacks
Use audio cords (not supplied) to connect an
optional component (such as a turntable) to
these jacks. You can then record or listen to
analogue audio from that component through
this system.
F
GAME INPUT AUDIO L/R jacks
Use audio cords (not supplied) to connect an
optional component (such as a video game or
camcorder, etc.) to these jacks. You can then
record or listen to analogue audio from that
component through this system.
G
GAME INPUT VIDEO jack
Use video cord (not supplied) to connect an
optional component (such as a video game or
camcorder, etc.) to this jack. You can then
output video to the connected TV from that
component through this system.
Notes
• The video game machine image may appear on the
TV screen even if the system is turned off.
• See “Selecting the surround effect” on page 17 for
video game sound effects.
• If you press GAME while the system is off, the
system turns on, the function switches to GAME, and
the equalizer also switches to the GAME EQ.
• If you press GAME while the system is on, the
function switches to GAME and the equalizer
automatically switches to the GAME EQ in the same
manner.
Listening to an MD deck or
VCR, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 23.
2
Press FUNCTION repeatedly until “MD”
or “VIDEO” appears.
Start playing the connected component.
Notes
• Holding down FUNCTION, and then pressing
?/1
while the power is off automatically turns the power
on and selects “VIDEO” as the function. When the
system is in Power Saving Mode, this function does
not work.
• If the sound is distorted or too loud when “VIDEO”
is selected or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD.”
Listening to a turntable, etc.
1
Connect the audio cords.
See “Hooking up optional components” on
page 23.
2
Press FUNCTION repeatedly until
“PHONO” appears.
Start playing the connected component.
Listening to audio from a
connected component
