![background image](http://html.mh-extra.com/html/sony/lbt-xb3/lbt-xb3_operating-instructions-manual_1329867002.webp)
2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
This caution label is located inside the unit.
For customers in the United Kingdom
A moulded plug complying with BS 1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or BSI to
BS 1362, (i.e. marked with
2
or
@
mark) must be
used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse
cover after you change the fuse. Never use the plug
without the fuse cover. If you should lose the fuse
cover, please contact your nearest Sony service
station.
IMPORTANT
If the plug supplied is not suitable for the socket
outlets in your home, it should be cut off and an
appropriate plug fitted in accordance with the
following instructions.
The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with letter N or
coloured black. The wire which is coloured brown
must be connected to the terminal which is marked
with the letter L or coloured red.
Do not connect either wire to the earth terminal in
the plug which is marked by the letter E or by the
safety earth symbol Y or coloured green or green-
and-yellow.
WARNING
To prevent shock hazard, do not insert the plug cut
off from the mains lead into a socket outlet. This
plug cannot be used and should be destroyed.
Note
The AC power cord has been fixed on the rear panel
with the plug band temporarily for shipment.
Unlock the plug band to remove the plug.
This stereo system is equipped with the Dolby* B-
type noise reduction system.
* Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
a
are
trademarks of the Dolby Laboratories Licensing
Corporation.
This appliance is classified
as a CLASS 1 LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.
Back panel
Plug band
Summary of Contents for LBT-XB3
Page 43: ...43 ...