15
Basic Operations
n
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
FM
˜
AM
Preset number Frequency
Listening to the
radio
— Preset Tuning
Before using this function, preset radio
stations in the tuner’s memory (see “Step 3:
Presetting radio stations” on page 8).
1
2
3
STEREO/MONO
VOLUME
VOL +/–
1
/
u
(Power)
=/+
2
Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
Each time you press this button, the
tuning mode changes as follows:
MANUAL
n
AUTO
n
PRESET
3
Press /– (or
=/+
on the remote) to tune in the desired
preset station.
To
Do this
Turn off the radio
Press
1
/
u
.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press
/– to tune in the desired station.
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
in the last received station (One Touch Play).
• You can switch from another source to the radio
by pressing TUNER/BAND (Automatic Source
Selection).
• If an FM program is noisy, press STEREO/
MONO so “MONO” appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
