![background image](http://html.mh-extra.com/html/sony/lbt-v3900/lbt-v3900_operating-instructions-manual_1329861053.webp)
53
Tuner
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display.
• Adjust the antenna.
• The signal strength is too weak. Connect
an external antenna.
A stereo FM program cannot be received in
stereo.
• Press STEREO/MONO so “STEREO”
appears in the display.
If other problems not described
above occur, reset the system as
follows:
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press GROOVE, ENTER/NEXT, and DISC
1 at the same time.
Specifications
Amplifier section
(LBT-V3900)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
100 + 100 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
120 + 120 watts
(6 ohms at 1 kHz, 10 %
THD)
The following measured at AC 220 V, 50 Hz
DIN power output (Rated)
90 + 90 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
105 + 105 watts
(6 ohms at 1 kHz, 10 %
THD)
Peak music power output (Reference)
1,500 watts
(LBT-V5900)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
120 + 120 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
140 + 140 watts
(6 ohms at 1 kHz, 10 %
THD)
The following measured at AC 220 V, 50 Hz
DIN power output (Rated)
110 + 110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
130 + 130 watts
(6 ohms at 1 kHz, 10 %
THD)
Peak music power output (Reference)
2,000 watts
Inputs
PHONO IN (phono jacks):sensitivity 3 mV,
impedance 47 kilohms
VIDEO (AUDIO) IN (phono jacks):
sensitivity 250 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
VIDEO (AUDIO) OUT (phono jacks):
voltage 250 mV,
impedance 1 kilohms
VIDEO (phono jack):
max. output level
1 Vp-p, unbalanced,
Sync negative,
load impedance 75 ohms