– 9 –
KV
-XF34M31/XF34M50/XF34M80/XF34M93
RM-954
RM-954
RM-954
RM-953
5
Using Your New TV
Using Y
our New TV
Front of TV
Notes
• If you connect a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the
˘
(antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• If both
(S video input) and
…
1 (video input) at the rear of your TV
are input at the same time, the
(S video input) is automatically
selected. To view
…
1 (video input), disconnect the S video cable.
• Do not connect video equipment to
…
3 (video input) at the front and the
rear of your TV at the same time; otherwise the picture will not be
displayed properly on the screen.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tip
• If you want to stop the automatic channel presetting, press MENU twice.
Note
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 31).
Now You Are Ready. . .
To watch your TV, see page 9.
AUTO
PROGR
ONE-PUSH AUTOMATIC PROGRAMMING
ONE-PUSH AUTOMATIC PROGRAMMING
PROGR
6
Using Your New TV
Connecting the 3D WOOFER
You can enjoy high quality sound by connecting the 3D WOOFER.
Bottom of 3D WOOFER
1
Place the foot at the front of the 3D WOOFER into the footholds on the top
of your TV.
2
Fit the ribs at the back of the 3D WOOFER into the provided slots at the back
of your TV.
3
Connect the wires to the 3D WOOFER (8
Ω
) terminals at the rear of your TV.
The red wire should be connected to the
‘
red terminal and the black wire
to the
’
black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with it’s neighbouring 3D WOOFER terminal.
Rear of TV
1
2
3
Black wire
Red wire
