– 30 –
– 29 –
KV-HA21M50/HA21M60/HA21M80/
KV-HA21M80/H/HA21M81/HA21P52
RM-969
KV-HA21M50/HA21M60/HA21M80/
KV-HA21M80/H/HA21M81/HA21P52
RM-969
5-2. CIRCUIT BOARDS LOCATION
5-3. SCHEMATIC DIAGRAM
Note:
•
All capacitors are in µF unless otherwise noted.
•
All electrolytic capacitors are rated at 50V unless otherwise
noted.
•
All resistors are in ohms.
k
Ω
= 1000
Ω
, M
Ω
= 1000k
Ω
•
Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mm
Rating electrical power 1/4W (CHIP: 1/10W)
•
: nonflammable resistor.
•
¢
: internal component.
•
: panel designation or adjustment for rrepair.
•
All variable and adjustable resistors have characteristic curve
B unless otherwise noted.
•
Redings are taken with a color-bar signal input.
no mark
: COMMON
(
)
: PAL
[
]
: NTSC 3.58
•
Readings are taken with a 10 M
Ω
digital multimeter.
•
Voltage are dc with respect to ground unless otherwise
noted.
•
Voltage variations may be noted due to normal produc-
tion tolerances.
•
All voltage are in Volt.
•
✽
: Cannot be measured.
•
Circled numbers are waveform references.
•
: B +bus.
•
: B –bus.
•
÷
: signal path.
Reference information
RESISTOR
: RN
METAL FILM
: RC
SOLID
: FPRD
NONFLAMMABLE CARBON
: FUSE
NONFLAMMABLE FUSIBLE
: RS
NONFLAMMABLE METAL OXIDE
: RB
NONFLAMMABLE CEMENT
: RW
NONFLAMMABLE WIREWOUND
:
✽
ADJUSTMENT RESISTOR
COIL
: LF-8L
MICRO INDUCTOR
CAPACITOR
: TA
TANTALUM
: PS
STYROL
: PP
POLYPROPYLENE
: PT
MYLAR
: MPS
METALIZED POLYESTER
: MPP
METALIZED POLYPROPYLENE
: ALB
BIPOLAR
: ALT
HIGH TEMPERATURE
: ALR
HIGH RIPPLE
Note:
The component identified by shading and
mark
!
are critical for safety. Replace only
with part number specified.
A BOARD
CV BOARD
V2 BOARD (KV-HA21M81 ONLY)
A3 BOARD (KV-HA21M60 ONLY)