– 12 –
KV
-G14K3/G21K3
RM-870
2-6. PICTURE TUBE REMOVAL
(1)
For KV-G14K3
2 A board
3 C board
4 Deflection yoke
Cushion
5 Four screws
(Tapping screws)
1 Anode cap
(2)
For KV-G21K3
2 A board
3 C board
4 Deflection yoke
Cushion
5 Four screws
(Tapping screws)
1 Anode cap
a
a
b
b
2
Using a thumb pull up the rubber
cap firmly in the direction indicated
by the arrow
b
.
1
Turn up one side of the rubber cap
in the direction indicated by the
arrow
a
.
c
Anode button
3
When one side of the rubber cap is
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling it up in the direction of the
arrow
c
.
•
HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-caps.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.