12
15
Using the TV menu system
Setting up Dolby Surround
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the
V
button to select the symbol on the menu screen then press
B
to enter
the ‘Set Up’ menu.
3. Press the
V
button to select ‘Dolby Surround Set Up’ then press
B
to enter the
‘Dolby Surround Set Up’ menu.
4. Press the
v
or
V
buttons to select ‘Surround Mode’ then press
B
to enter the
‘Surround Mode’ sub menu. Press the
v
or
V
buttons to select’Pro Logic’ if you are
using the surround speakers or ‘TruSurround’ if you are not using surround speakers.
Press the OK button to confirm.
5. Press the
v
or
V
buttons to select ‘Level Setting’ then press
B
to hear a test tone
which will sequentially switch through all speakers. From your sitting position all
volume levels should be the same. If this is the case, press the OK button to store the
settings. If this is not the case:
6. To select ‘Speaker Mode’ ensure ‘Surround Mode’ is set to ‘Pro Logic’ then press the
v
or
V
buttons to select ‘Speaker Mode’. Press
B
to enter the ‘Speaker Mode’ sub
menu. Press the
v
or
V
buttons to select one of the following speaker modes then
press the OK button to store:
‘Normal’
All speakers are activated
‘Phantom’
Centre speaker is switched off
‘Wide’
Wider bandwidth from centre speaker
‘3CH Normal’
Surround speakers are switched off
‘3CH Wide’
Surround speakers are switched off, centre speaker carries full
frequency response.
7. To select ‘Delay Time’ ensure ‘Surround Mode’ is set to ‘Pro Logic’ then press the
v
or
V
buttons to select ‘Delay Time’. Press
B
to enter the ‘Delay Time’ sub menu.
Press the
v
or
V
buttons to select the desired delay time for the surround speakers.
You have the choice between 15ms for big rooms, 20ms or 25ms for standard rooms
and 30ms for small rooms. Once you have set the time, press the OK button to store.
8. Press the
v
or
V
buttons to select ‘Auto Surround’ then press
B
to enter the ‘Auto
Surround’ sub menu. Press the
v
or
V
buttons to select ‘On’ or ‘Off’ then press the
OK button to store.
9. Press the MENU button to remove the menu from the TV screen.
Before listening to Dolby Surround encoded programmes you need to adapt the Dolby settings to suit your individual
requirements. This setting up is normally only necessary when installing your TV set or when changing the speaker positions.
(a) Press the
v
or
V
buttons to select ‘Front L.’, ‘Centre’, ’Front R.’ or ‘Surround’
speakers.
(b) Press
b
or
B
to adjust the volume level then press the OK button to store.
(c) Repeat steps (a) and (b) for all the speakers you wish to adjust.
(d) Press the OK button to store the new settings.
(e) Press the
b
button to return to the main ‘Dolby Surround Set Up’ menu screen.
Dolby Surround Set Up menu.
Selecting ‘Delay Time’.
16
Using the TV menu system:
Re-arranging the TV channels
Programme Sorting menu screen.
Programme Sorting menu screen.
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the
V
button to select the symbol on the menu screen then press
B
to enter
the ‘Set Up’ menu.
3. Press the
V
button to select ‘Programme Sorting’ then press
B
to enter the
‘Programme Sorting’ menu.
4. Press the
v
or
V
buttons to select the channel you want to move then press
B
to
confirm.
5. Press the
v
or
V
buttons to select the new programme position (eg PROG 4) for your
selected channel then press the OK button to confirm. The selected channel now
moves to its new programme position and the other channels move accordingly.
6. Repeat steps 4 and 5 if you wish to sort the other channels.
7. Press the MENU button to remove the menu from the TV screen.
Manually tuning the TV
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the
V
button to select the symbol on the menu screen then press
B
to enter
the ‘Set Up’ menu.
3. Press the
V
button to select ‘Manual Set Up’ on the menu screen then press
B
to
enter the ‘Manual Set Up’ menu.
4. Press the
V
button to select ‘Manual Programme Preset’ on the menu screen then
press
B
to enter the ‘Manual Programme Preset’ menu.
5. Press the
v
or
V
buttons to select a programme number for your channel (eg PROGR
1 for BBC1) then press
B
to highlight the ‘SKIP’ column.
6. Press
v
to select ‘OFF’ then press
B
to highlight the ‘SYS’ column.
7. Press the
v
or
V
buttons to select the ‘AUS’ TV broadcast system or ‘EXT’ for a
video input source (AV1, AV2, ...) then press
B
to confirm.
8. Press the
v
or
V
buttons to select ‘C’ for terrestrial channels, ‘S’ for cable channels,
or ‘F’ for direct frequency inputs then press
B
to confirm.
9. Select the first number digit of ‘CH’ (channel) then the second number digit of ‘CH’
with the number buttons on the remote control or
Press the
V
button to search for the next available channel.
10. If you do not wish to store this channel on the programme number you selected, press
the
v
or
V
buttons to continue searching for the desired channel.
11. If this is the channel you wish to store, press the OK button.
12. Repeat steps 5-11 if you wish to store more channels then press the MENU button to
remove the menu from the TV screen.
After tuning the TV, you can use this feature to change the order of the channels on the TV.
You should have already tuned the TV automatically using the instructions at the start of this manual. However you
can carry out this operation manually, adding channels to the TV one at a time.
Manual Programme Preset menu.
更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
