10
8
Operation
Teletext
Most TV channels broadcast information via Teletext. The index page of the Teletext service (usually page 100) gives you
information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors.
Switching Teletext on and off
1. Select the TV channel which carries the teletext service you want to view.
2. Press the
button on the remote control once for Picture and Teletext (P&T). The
screen is divided in two, with the TV channel in the right corner and the Teletext
display on the left.
3. Press the
button twice to get Teletext only.
4. Press the
button three times for Mix mode.
5. Press the
button a fourth time to switch off Teletext.
Selecting a Teletext page
Input three digits for the page number using the numbered buttons on the control. If you
make a mistake, type in any three digits then re-enter the correct page number.
Using Other Teletext Functions
Selecting the next or preceding page
Press the
or
buttons on the remote control to select the previous or next page.
Selecting a sub page
A teletext page may consist of several sub pages. In this case an information line is
displayed, showing the number of subpages. Select the sub page by pressing
v
or
V
.
To freeze a Teletext page
Press the
button to freeze the page. Press again to cancel the freeze.
Revealing the index page
Press the
button to reveal the index page (normally page 100).
Using colour buttons to access pages (Fastext)
(only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a page, press a coloured button
on the remote control (green, red, yellow or blue) to access the corresponding page.
Using the ‘Page Catching’ feature
1. Press the numbered buttons on the remote control to select a teletext page which has
several page numbers on it (eg the index page).
2. Press the OK button.
3. Press
v
or
V
to select the desired page number then press the OK button. The
requested page is displayed after some seconds.
Index
TELETEXT
Programme
News
Sport
Weather
25
153
101
98
Index
TELETEXT
Programme
News
Sport
Weather
25
153
101
98
Index
TELETEXT
Programme
News
Sport
Weather
25
153
101
98
,,
Picture and Text mode.
Teletext only mode.
Mix mode.
P&T mode: Press the
button on the remote control then press PROGR+/-
to change the channel of the TV screen. Press
b
or
B
to change the size of the
TV screen then press
again to resume normal teletext reception.
9
Operation
Teletext
Using the Teletext menu
1. With Teletext switched on, press the MENU button on the remote control to display
the menu on the TV screen.
2. Press
v
or
V
to select your chosen item on the screen then press
B
to display the
relevant sub menu.
3. To remove the Teletext menu from the screen, press the MENU button.
Top/Bottom/Full
The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext
page. Press
v
to enlarge the upper half of the screen, Press
V
to enlarge the lower half.
Press the OK button to restore the page to normal size. Press
b
to return to the Teletext
menu screen.
Text Clear*
Text Clear is a function that displays a TV channel while a Teletext page is being found.
1. Press the
button on the remote control twice to select full screen text.
2. Press the MENU button to display the ‘Teletext’ menu.
3. Press
v
or
V
to highlight ‘Text Clear’ and press
B
to select.
4. The current TV channel is displayed. Once the text page has been found a blue
symbol will appear in the top left corner of the screen.
5. Press the
button on the remote control to view the page.
Reveal
Some Teletext pages contain hidden information (eg for a quiz), which can be revealed.
1. In text mode press the MENU button on the remote control to access the ‘Teletext’
menu.
2. Press
v
or
V
to highlight ‘Reveal’ and press
B
to select. The hidden information is
displayed on the screen.
Time Page**
Time Page allows a time-coded Teletext page (such as an alarm page), to be displayed
at a set time.
1. In Text mode press the MENU button on the remote control to access the ‘Teletext’
menu.
2. Press
v
or
V
to highlight ‘Time Page’ and press
B
to select. The ‘Time Page’ sub
menu is displayed.
3. Enter the desired page number using the numbered buttons on the remote control.
4. Enter the desired time using the remote control.
5. Press OK to confirm the settings. The TV will exit Teletext mode and the time will
be displayed in the top left hand corner of the screen. At the requested time the
desired page is displayed.
Page Overview***
In this menu the TOP-Text pages are divided into two columns, the first column showing
‘blocks’ of pages and the second showing ‘groups’ of pages.
1. Press
b
or
B
to select the first or second column.
2. Press
v
or
V
to select the relevant ‘group’ or ‘block’ of pages.
3. Press the OK button to display the chosen pages.
*Available on Teletext Only and Mix modes
**Depending on availability of service, Time Page is as available on Teletext Only and Mix modes
***Only available if TOP-Text is transmitted by the TV station
The Teletext menu.
The Time Page menu.
更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com