- 18 -
2-8. Wire Dressing 1
Ensure that wires do not touch heatsinks and high temperature
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
20mm
20mm
2-10. Wire Dressing 3
Ensure the RF lead is dressed as shown circled above to avoid
obstructing the rear cover.
2-11. Wire Dressing 4
To avoid damage to the ground interconnecting leads from the
sharp edges of the heatsink they must be dressed as shown
above between the rear of the heatsink and the tuner.
2-9. Wire Dressing 2
The sheathed end of the ground connecting lead must be
plugged into the F3 board to avoid the possibility of the AC
mains power touching ground.
Summary of Contents for KV-36FS76U
Page 107: ......
