5
GB
Overview of Remote Control Buttons
Overview
1
To Temporarily Switch Off TV:
Press to temporarily switch
off TV (the standby indicator
on TV lights up). Press again to
switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not
in use.
After 15 minutes without a signal and without any button
being pressed, the TV switches automatically into standby
mode.
2
Selecting TV mode:
Press to switch off teletext or video input.
3
Selecting channels:
Press to select channels.
For double-digit programme numbers, enter the second digit
within 2.5 seconds, or press -/-- and then the first and second
digit.
If you enter an incorrect first digit, this should be corrected by
entering another digit (0-9) and then selecting -/-- button again
to enter the programme number of your choice.
4
Back to the channel last watched:
Press to watch the last
channel selected (watched for at least 5 seconds).
5
Selecting channels:
Press to select the next or previous
channel.
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to “Teletext” section of this instruction
manual on page 17.
6
Displaying the menu system:
Press
to display the menu on the TV screen.
Press again to remove the menu display
from the TV screen.
7
Menu selection
•
When MENU is switched on:
Scroll Up.
Scroll Down.
Previous menu or selection.
Next menu or selection
OK
confirms your selection.
•
When MENU is switched off:
OK
Shows a channel overview.
Press
or
to select the channel and
then, press again the
OK
button to
watch the selected channel.
8
Selecting Teletext:
Press to switch on
teletext.
9
Selecting Screen format:
Press
repeatedly to change the format of the
screen. For more details, refer to chapter
“Auto Format” on page 15.
!º
This button only works in Teletext mode.
!¡
Selecting Picture mode:
Press
repeatedly to change the picture mode.
!™
Selecting sound mode:
Press
repeatedly to change the sound mode.
!£
Adjusting TV volume:
Press to adjust
the volume of the TV.
!¢
Choosing the Sound Channel:
In case
of a bilingual broadcast, press this button
repeatedly to select sound channel 1 or
sound channel 2.
!∞
Selecting input source:
Press
repeatedly until the desired input symbol
of the source appears on the TV screen.
!§
Muting the Sound:
Press to mute TV
sound. Press again to restore the sound.
!¶
Displaying on Screen information:
Press to display all on-screen indications.
Press again to cancel.
!§
!¶
1
!¢
2
!∞
!£
5
4
6
8
!™
9
!¡
!º
3
7
02GBKV28CL10B.fm Page 5 Friday, January 31, 2003 4:57 PM
