7
Getting Started
ERASE
–25
ADD
+25
Presetting Channels
Presetting channels manually
To change the program position for a channel or to
receive a channel with a weak signal, preset the
channel manually.
1
Press CH +/– until the channel appears on
the screen.
2
Press number buttons to select the program
position, then press ENTER.
3
Press ADD.
“+” appears beside the channel position number,
indicating that presetting is complete.
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press AUTO
PGM +/–.
1
Press CH +/– until the unused or unwanted
program position appears on the screen,
then press ENTER.
2
Press ERASE.
“–” appears beside the channel position number,
indicating that disabling is complete.
To cancel the skip setting
Preset the channel manually or automatically again.
POWER
CABLE
CABLE ON
CABLE OFF
AUTO PGM
2
3
4
2
AUTO PROGRAM
Presetting channels automatically
You can preset TV channels in numerical sequence
from program position 1.
1
Press POWER.
If the TV is in standby mode after you have pressed
POWER, press POWER on the remote control.
2
Press CABLE to set cable TV on or off.
3
Press AUTO PGM.
Summary of Contents for KV-25FXR20
Page 2: ...2 ...