8
Installation
Sony KV-21HFV2100 Group J3 (
GB
)_2-187-288-11 (1)
x
Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the top control panel.
Tip
• The MENU,
and
V/v/B/b
buttons on the remote control can also be used for the
operations below.
1
Press /– to select the desired
menu language, then press TV/VIDEO.
The selected menu language appears.
2
Press /– to select “Yes”, then
press TV/VIDEO to preset the channels
automatically or select “No” to skip
automatic channel presetting.
Once you select “Yes”, your TV will start
searching for all the available channels.
If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press TV/VIDEO.
3
Press /– to adjust the bars on
the top and bottom of the menu if they
are slanted, then press TV/VIDEO.
If no adjustment is necessary, then
press TV/VIDEO.
4
Press /– to select “No”, then
press TV/VIDEO. This menu will not
appear again the next time you turn on
the TV by pressing
!
.
To allow this menu to appear again, select
“Yes”, then press TV/VIDEO.
Tips
• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by using the menu system (see page 18) or by pressing the
MENU button on the top control panel for about five seconds to reset the TV (see page 30).
Initial Setup
Language:
Move
English
Select
[TV/VIDEO]
End
[MENU]
Initial Setup
First please connect cable/
antenna
Start Auto Program now?
Yes
No
Move
Select
[TV/VIDEO]
End
[MENU]
Initial Setup
Display this menu next time?
Yes
No
Move
Select
[TV/VIDEO]
Tilt Correction
[ – VOL ]
[ VOL + ]
Move [– VOL +]
Select [TV/VIDEO]
End [MENU]
