Getting Started
2
About Moisture Condensation
If the unit is brought directly from a cold place to a
warm place, moisture may condense on the video
head drum. If this happens, the tape may stick to
the head drum and it may be damaged or the unit
may not operate correctly. To avoid possible
damage caused by moisture condensation, be sure
not to leave a cassette inside the compartment
when the unit is not in use. When bringing the unit
from a cold place to a warm place, wait for about 10
minutes before operating it.
Caution
Television programs, films, video tapes and other
materials may be copyrighted.
Unauthorized recording of such materials may be
contrary to the provisions of the copyright laws.
Color System of Your Set
This video TV is designed to receive TV programs
based on PAL (B/G, I and D/K), SECAM (B/G and
D/K) and NTSC (M) color systems and to record
and play on PAL, MESECAM and NTSC color
systems.
WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
Dangerously high voltages are present inside the
set. Do not open the cabinet. Refer servicing to
qualified personnel only.
Safety Information
This unit operates on extremely high voltages. To
prevent fire or electric shock, please follow the
safety procedures below. For your protection, refer
all servicing to qualified personnel only.
For general safety:
•
Do not expose the unit to rain or moisture.
•
Do not open the rear cover.
For safe installation:
•
Do not block the ventilation openings.
•
Do not install the unit in hot, humid, or exces-
sively dusty places.
•
Do not install the unit where it may be exposed to
mechanical vibrations.
For safe operations:
•
Do not operate the unit on anything but 110–240
V AC.
•
Do not operate the unit if any liquid or solid
object falls in it—have it checked immediately.
•
Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never
by the cord.
G-Code and Instant Video programmer are
trademarks applied for by Gemstar
Development Corp. G-Code system is
manufactured under license from Gemstar
Development Corporation.
Summary of Contents for KV-14VM5MT, KV-21VM6MT
Page 45: ...EN Additional Information 45 ...
