Sony KV-14FV1B, Service Manual

Page: 11 / 84

– 11 –
12
Recording TV programmes using DIAL- TIMER
The Dial-Timer recording function allows you to preset your Video TV to record one programme within a 24 hour period. for setting the Dial-Timer, use DIAL TIMER button on the Video TV.
Before you begin: •
Make sure that the clock is set correctly. If it is not, refer to the “Setting the Clock Manually” section of this instruction manual (see page 7).
•
Make sure that the loaded cassette has its safety tab intact.
•
Make sure that the Video TV does not enter the timer recording standby mode (the TIMER REC indicator on the Video TV should not be lit).
1
In standby mode, press the standby button
to turn on the Video TV.
2
Press
DIAL TIMER
. The “Dial Timer” menu appears on the screen.
3
Turn
DIAL TIMER
to set the hour of the start time, then press
DIAL TIMER
to
confirm.
4
Proceed
in
the
same
way
as
in
step
3
to
set
the
minutes
of
the
recording
start
time,
the
recording time period and programme number to be recorded. • The hour increases or decreases by one hour. • The minutes increase or decrease by one minute. • The recording time period increases or decreases by 15 minutes. • The programme position changes as follows
0 <—> 1 <—> 2... <—> 99 <—> L1 <—> L 2 <—> 0 <—>1 • L1 is used for the equipment connected to the Scart connector
:
1/
placed on the rear
of the Video TV.
• L2 is used for the equipment connected to the front connectors
…
and
.
5
With
TAPE SPEED
highlighted, turn the
DIAL TIMER
to select the recording
speed:
SP
for Standard Play or
LP
for Long Play, then press the
DIAL TIMER
.
•
In LP mode you can record double time than in SP mode.
6
Turn
DIAL TIMER
to move the cursor to
OK
, then press
DIAL TIMER
to confirm
all the settings. • If a warning message appear on the screen, the recording is cancelled and after proceed
according the necessities, you must re-enter again the Dial timer settings.
The Dial Timer indicator on the Video TV lights up and the Video TV enters into the timer recording standby mode.
Changing or Cancelling the Dial Timer settings
1
Press
DIAL TIMER
.
The Dial Timer menu appears on the screen.
2
Turn
DIAL TIMER
to
CHANGE
(to
change
the
recording
settings)
or
to
CLEAR
(to
clear the recording settings) and press
DIAL TIMER
.
3
a)
If you have selected
CLEAR
, press
DIAL TIMER
and all the settings will be
cleared.
b)
If
you
have
selected
CHANGE
, you
can
change
all
the
settings
by
following
steps
from
2
to
5
of
the
above
section
“Recording
TV
Programmes
using
DIAL
TIMER”.
VCR-Recording
ST
AR
T
DURA
TION PROG
23 22:00
11:00 01
SA
T
T
APE SPEED:
SP
OK CHANGE CLEAR
Dial
T
imer
23 SA
T
23:00
SELECT
OK
Turn
Press
Turn
Press
ST
AR
T
DURA
TION PROG
23 22:00
11:00 01
SA
T
T
APE SPEED:
SP
OK CHANGE CLEAR Dial
T
imer
23 SA
T
23:00
SELECT
OK
13
GB
VCR-Recording
This function allows you to preset your Video TV to record up to 5 programmes within a one-month period.
Before you begin:
•
Make
sure
that
the
clock
is
set
correctly.
if
it
is
not,
please
refer
to
the
section
“Setting
the Clock Manually”(see page 7).
•
Make sure that the loaded cassette has its safety tab intact.
Setting the Timer
1
In standby mode, press the standby button
to turn on the Video TV.
2
Press the
TIMER REC
button to display the Programme List menu.
3
Press
or
repeatedly
to
set
the
date
(for
daily
and
weekly
recording,
refer
to
the
section “Daily/Weekly Recording” below), then press
.
4
Proceed
in
the
same
way
as
in
step
3
to
set
recording
start
time,
recording
stop
time,
programme number, tape speed (SP or LP) and VPS/PDC “On” or “Off”.
If you have made a mistake during timer setting, press
to return to the
previous position and correct the setting.
•
Date:
Daily/Weekly Recording
You can preset your Video TV to record the same programme every day of the
week (daily recording) or the same programme on the same day every week (weekly recording).
Whilst you are in DATE position, with each press of
, the setting changes as
follows: 23 SAT (today) —> MON-SUN —> MON-SAT —> MON-FRI —> SAT (means every Saturday...) —> FRI —> SUN —> 22 (next month).—>...
•
Time:
•
The hour increases or decreases by one hour.
• The minutes increase or decrease by one minute.
•
Programme number:
• The programme position changes as follows: 0 <—> 1 <—> 2... <—> 99 <—> L1 <—> L 2 <—> 0 <—>1 •
L1
is
used
for
the
equipment
connected
to
the
Scart
connector
:
1/
placed
on the rear of the Video TV.
• L2 is used for the equipment connected to the front connectors
…
and
.
•
Tape Speed:
• In “LP” mode you can record double than in SP mode
•
VPS/PDC:
• For details refer to “Timer recording with VPS/PDC signals” section of this
instruction manual (see page 14).
5
Press
OK
.
6
If
you
want
to
set
more
programmes,
press
or
to
move
the
cursor
to
ADD
and
then press
OK
. Repeat steps from 3 to 5.
7
After
setting
all
your
desired
programmes
press
or
and
highlighting
OK
, press
the
OK
button to confirm your settings.
The TIMER REC indicator on the Video TV lights up and the Video TV enters into timer recording standby mode.
To Stop Timer Recording
Press
the
ON/OFF
button
on
the
remote
control.
Then
the
TIMER
REC
indicator
on
the
Video TV turns off.
Using the Video TV before Timer Recording starts
You can watch a TV programme, check the timer settings and reset the counter in timer
recording
standby
mode.
H
owever,
if
you
want
to
eject
the
cassette,
use
the
tape operation buttons, change or cancel the timer settings, you have to press the ON/OFF
button
on
the
remote
control
to
turn
off
the
TIMER
REC
indicator
on
the
Video TV set. Remember to press again the
ON/OFF
button to make the TIMER REC indicator
lights up again and the set comes back into the timer recording standby mode.
Recording TV Programmes Using the Timer
VPS DA
TE ST
AR
T
ST
OP
PROG PDC
23 SA
T
22:00 23:00 03 SP
ON
OK
ADD CHANGE CLEAR
Programme List 23 SA
T
20:00
OK