Sony KP-ER43M31, Service Manual

Page: 44 / 225

– 44 –
KP-ER43M31/M61/M90/M91, ER53M31/M61/M90/M91
RM-961
7. DRC100 60 Hz (NTSC) Mode
1) Enter the NTSC monoscope signal, and set the DRC100.
2) Set in the service mode, and write the following data to
NVM.
Condition :
Category Item Data
GEO 0B AGL 07
0C BOW 07
15 VSC 22
MID 00 HPH 49
01 VPH 13
3) Adjust the main deflection. (Refer to 5-5-2.)
8. PIP 60 Hz (NTSC) Mode
1) Enter the NTSC monoscope signal, and set in the service
mode.
2) Open the remote control cover, press “ (PIP)” button on
the commander to set the PIP mode.
3) Confirm and set the following data.
Condition :
Category Item Data
GEO 00 VSZ
01 VPS
02 VLN
03 SCO
04 HSZ
05 HPS
07 PAP
08 UPN
09 LPN
0A TRZ
0B AGL 07
0C BOW 07
15 VSC 22
MID 00 HPH 49
01 VPH 25
4) Press “ (MUTE)”+“
-
” buttons on the commander to
write the data to the NVM.
4) After the Main Deflection Adjustment finished, press “
(MUTE)”+“ - ” buttons on the commander to write the data
to the NVM.
5) Adjust the sub deflection (Projector Engine Adjustment).
(Refer to 5-5-3.)
6) After the Projector Engine Adjustment finished, press “
(MUTE)”+“
-
” buttons on the commander to write the data
to the NVM.
Input Signal H SIZE V SIZE
NTSC monoscope 15.7 ± 0.1 sq. 11.8 ± 0.1 sq.
SPEC
Overscan Spec. = 7.5%
Same as
DRC1250
60 Hz (NTSC)
mode