Sony KP 53V80, Service Manual

Page: 17 / 108

– 17 –
KP-48V80/53V80/61V80
RM-Y905 RM-Y905 RM-Y905
1 8
Using the Remote Control
Inserting the batteries
Insert two size AA (R6) batteries (supplied)
by matching the + and – on the batteries to
the diagram inside the remote control’s
battery compartment.
Notes:
• Remove the batteries to avoid damage
from possible battery leakage whenever
you anticipate that the remote control
will not be used for an extended period.
• Handle the remote control with care.
Avoid dropping it, getting it wet, or
placing it in direct sunlight, near a heater
or where the humidity is high.
• Your remote control can be programmed to
operate most video equipment.
(see “Operating Video Equipment” on
page 51)
Basic Set Up
Using the remote control joystick
The supplied remote control has a joystick
which moves the on-screen selector in four
directions. In most cases, moving the joystick
up, down, left or right will cause the selector
to
move in the selected direction.
In some cases, the selector may move in four
directions according to the function. Pressing
down on the center of the joystick (
) will
activate the selected item.
You may also move the joystick right to
activate a selected item. (There are some
exceptions to this option.)
Select
MENU
RESET
VOL CH
AUDIO AUDIO
GUIDE INDEX
FREEZE
Move
.
Adjusting Sliders
When menu items present a slider ( or
), move the joystick up, down, left or
right to adjust the setting.
On Line Help/Instructions
Several menu windows will provide
prompts and instructions to assist you in
navigating through the different functions.
1 9
Setting Up the Projection TV
Automatically
The AUTO SET UP feature will allow you to
set the on-screen language and set all
receivable channels.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the projection TV manually.
(see “Using the Channel Set Up menu” on pages
34 and 35)
Notes:
• Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
“AUX” does not appear next to the
channel number.
• Perform this function during the day,
with the antenna and/or cable properly
connected, to ensure that all available
channels will be broadcasting and
receivable.
• When you perform AUTO SET UP, all the
settings in the Video, and Audio menus
are reset to the factory settings.
Using the buttons on the front panel of the
projection TV:
1
Press POWER to turn on the projection
TV.
The AUTO SET UP screen appears.
2
Press C to select English,
CHANNEL – to select Español or
to select Français.
The screen will change to reflect your
choice.
3
Press VOLUME – to continue.
4
Press C to preset channels
automatically.
“Auto Program” appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
POWER
VOLUME
– +
CHANNEL
– +
CHANNEL
– +
VOLUME
– +
TV/VIDEO
FLASH FOCUS
VOLUME
POWER
TIMER/STAND BY
– +
CHANNEL
– +
Press [ SET UP ] to exit.
First please connect
the antenna.
A u t o S e t U p :
E s p a ñ o l :
E n g l i s h :
F r a n ç a i s :
[ V O L – ]
[ C H – ]
[ C H + ]
[ V O L + ]
A u t o P r o g r a m
Oprima [ SET UP ] para
salir.
Primero conecte la
antena.
[ V O L – ]
[ C H – ]
[ C H + ]
[ V O L + ]
A u t o S e t U p :
E s p a ñ o l :
E n g l i s h :
F r a n ç a i s :
N o :
A u t o P r o g r a m ?
C o n t i n u e t o
Y e s :
[ C H – ]
[ C H + ]