– 19 –
KLV-32S530A, 26, 32, 37 S550A
RM-GA016
RM-GA016W
5-3-4. Attach C Sheet Core and Insert Connector Assy 14P
5-3-5. Attach C Sheet Core and Insert Connector Assy 14P
OK
NG
4
1) Attach Sheet Core, C (X3) to frame bottom as shown.
2) Insert Conn Assy 14P to inverter and G4T PWB as shown. Attach Sheet Core, C as shown.
For all models
3) Attach Sheet Core, C to LVDS harness.
4) Attach Sheet Core, C to Connector Assy 14P and LVDS harness on frame spine.
For CISPR models only
5) Insert screw on to earth clamp on LVDS harness.
Note: When inserting LVDS harness to panel,
make sure it is fully inserted and in the
correct direction as shown.
1) Attach Sheet Core, C (X3) to main bracket as shown.
2) Attach Sheet Core, C (X1) to panel as shown.
3) Attach and screw Lead Assy, Earth on to G4T PWB as shown.
4) Attach Sheet Core, C (X1) to main bracket as shown.
Attach Sheet Core, C (X1)
to Conn Assy 14P and
LVDS harness.
Attach Sheet Core,
C to Lead Assy,
Earth on main
bracket.
Non-CISPR model
CISPR model
Attach Sheet Core, C to
frame bottom (X3).
Dress SP Conn Assy 4P and Conn Assy 10P
wires along this path (behind under cover) and
below raised area of bottom bracket.
Frame bottom
Do not cover screw
hole with Sheet
Core, C
Insert Conn Assy 14P to
G4T PWB.
Attach Sheet Core, C (X1).
Attach Sheet Core, C
(X1) to LVDS harness.
Do not cover screw hole with
Sheet Core, C. Keep LVDS harness
away from screw hole.
Attach Sheet Core, C
(X1) to LVDS harness.
Attach Sheet Core, C (X1) to
Conn Assy 14P and LVDS
harness.
Insert screw on to earth
clamp on LVDS harness.
Do not cover screw hole with
Sheet Core, C. Keep LVDS harness
away from screw hole.
Dress Conn Assy 10P and
SP Conn Assy 4P together.
Attach and screw
Lead Assy, Earth.
Dress SP Conn Assy 4P
and Conn Assy 10P
together using Sheet
Core, C to panel.
Attach Sheet Core, C
to main bracket (X3).
Attach Sheet Core, C to
Conn Assy 13P, Conn Assy
14P and SP Conn Assy 4P.
4
3
2
1
3
4
5
4
3
2
1
Dress SP Conn Assy
4P to the left of this line
(edge of BT2 PWB)
