Sony KDS-70Q006 - 70" Qualia 006, Service Manual

Page: 227 / 255

Using the Menus
115
Using the Menus
SXRD
2-584-141- 11 (1)
4:3 Default
Select the default
screen mode to
use for 4:3
sources.
Wide Zoom Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Normal Select to return the 4:3 picture to normal
mode.
Full
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Zoom Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Off Select to continue using the current screen
mode setting when the channel or input is
changed.
Overscan Normal Select to display the picture within the normal
viewing area of the screen.
+1 or +2
Select to reduce the size of the picture to show
the overscan (i.e. the portion of the picture
outside of the normal viewing area).
Vertical Center Adjust
Allows you to move the position of the picture
up and down in the window. (Available only in
Wide Zoom
and
Zoom
modes.)
Press V or v and press to choose a
correction b10 and –10.
Vertical Size Adjust
Allows you to adjust the vertical size of the
picture. (Available only in
Wide Zoom and
Zoom
modes.)
Press V or v and press to choose a
correction b10 and –10.
Option Description
If 4:3 Default is set to
anything but Off , the
Wide Mode setting
changes only for the
current channel. When
you change channels
(or inputs),
Wide Mode
is automatically
replaced with the
4:3
Default setting. To
retain the current Wide
Mode setting as
channels and inputs
are changed, set
4:3
Default to Off .
z
01COV.book Page 115 Tuesday, November 30, 2004 5:02 PM