Introducing the Sony SXRD Projection TV
19
Intr
oduc
ing
the So
n
y
SXRD Pr
ojec
tion
TV
SXRD
2-584-141-
12
(1)
3
Insert the four screws pre-attached to the speaker into the screw holes on
the rear of the TV, turn the screws clockwise, and tighten them to secure
the speaker to the TV.
4
Repeat steps 1 through 4 with the right speaker.
✍
The speakers can be detached if required. If you use a multi-channel
surround speaker system and there is not sufficient space to install the
display unit, we recommend using the speakers detached.
✍
To prevent damage to the speaker housing or terminals, do not use
excessive force when attaching or detaching the speakers.
✍
Be sure to first remove the speakers before moving the TV.
✍
To remove dust from the transparent portions of the speakers, wipe
them with a clean, soft cloth.
✍
Do not connect the detached speakers to other audio equipment.
✍
Place the supplied slot covers to all four corners at the rear of the TV (as
shown in the following illustration) if you decide not to attach the
speakers. Avoid accidental swallowing of the slot covers by children.
Black pin
Rear of SXRD projection TV
Bottom slot
Top slot
Rear of SXRD
projection TV
