Other Information
136
SXRD
2-584-141-
12
(1)
TV cabinet creaks
❏
When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.
A slight creaking noise occurs
from the bottom part of the TV
❏
Cinema Black Pro
applies a mechanical iris system. When
Cinema Black Pro
is turned
On
/
Off
, a natural creaking noise occurs due to the basic structure of the
optical unit. The creaking sound is an inherent nature of this system and is not a
defect.
The cooling fan is loud
❏
If the SXRD projection TV is used at high altitudes and
High Altitude
is set to
On
, the cooling fan runs faster and its sound becomes louder. If the TV is not
used at high altitudes, set
High Altitude
to
Off
The signal from a selected
i.LINK device is not being
displayed
❏
If you have several i.LINK devices connected and operating at once, the TV may
not be able to display the signal from the selected device. Turn the other i.LINK
devices off, and reselect the desired i.LINK device.
❏
If you are using a digital VCR, turn off any Auto LINC functionality of the VCR.
For details, see the digital VCR’s user manual.
The TV does not turn on
❏
The SXRD projection TV cools down its projection lamp when the power is
turned off. It takes up to two minutes for the picture to come back after the TV is
turned on again. Wait for a while until the picture comes back.
Problem
Possible Remedies
