Sony KDP-57XBR2 - Digital High Definition Projection Tv, Service Manual

Page: 220 / 228

17
3-3-2 Performing the PJE Mode Coarse
Adjustment.
1. Enter the service mode, and select
category “PJE”.
2. Press the “ 1 ” or “ 4 ” button on the
remote to select the adjustment item,
and move the joystick button
to change the data.
3. Select item “GRN CENT” . If "BLU" or
"RED" is displayed, press the “ 3 ”
button on the remote until "GRN" is
displayed.
4. In the GRN, BLU, or RED mode, moving
the joystick or changes the data
for vertical deflection, and or
changes the data for horizontal
deflection.
5. Before exiting the PJE coarse
adjustment mode, be sure to press the
“[ MUTING ]” + “[ ENTER ]” buttons on
the remote to write the data to memory.
Failure to do this causes the new
adjustment data to be returned to the
data before adjustment, and the
adjustments will have to be redone!
3-3-3 Performing the PJE Mode Fine
Adjustment.
1. Enter the service mode and select
category “PJE”.
2. Select item 00 "FDIS” and set the data
to “01” so that the data at each
adjustment position on the screen can
be displayed in the fine adjustment
mode.
3. Press the “ 9 ” button on the remote,
and the fine adjustment mode will be
active where the green marker appears
in the center of screen (assuming that
the GRN mode is currently selected).
4. Press the “ ” button on the
remote, and the marker color will
change between green ( in GRN mode)
and white.
5. Use the “ 1 ” or “ 4 ” button on the
remote, or use the joystick button, to
move the marker to the positions that
require fine adjustment.
When the adjustment marker color is white, it can
be moved in the directions shown by the arrows
by moving the joystick button (in this case, fine
adjustment is disabled)
When the adjustment marker color is green, blue,
or red, it can be moved in a spiral direction by
pressing the " 1 " and " 4 " buttons (in this
case, the fine adjustments can be made).
Adjustment marker: when white, it can be freely moved
left, right, up, and down.
Adjustment marker: when red, green, or blue, it can be
moved in a spiral direction using the 1 and 4
buttons on the remote.