98
M
e
nus
M
e
nus
M
e
nus
SETU
P
S
E
TU
P
SETU
P
Timer 1
and
Timer 2
are not available to be set until you set
the
Current Time
.
1
Press
V
or
v
to highlight
Timer 1
or
Timer 2
. To set the
timer, press
b
.
2
Press
V
or
v
to highlight one of the following options
,
then press
.
Program
Select to set the Timer by day,
time, duration, and channel.
Off
Select to turn off the Timer. (Your
previous settings are saved.)
3
If you selected
Program
in step 2, Press
V
and
v
to set
the day(s), hour, minute, duration, and channel
number. Press
or
b
to confirm each setting and
move to the next setting. Press
B
to go back to the
previous setting.
4
Press
MENU
to exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
Current Time
1
Press
to select
Current Time.
2
Press
V
and
v
to set the current time (day, hour, and
minute). Press
or
b
to confirm each setting and
move to the next setting. Press
B
to go back to the
previous setting.
3
Press
MENU
to exit the Menu.
Diagnostics
Displays the strength of the terrestrial digital broadcast
signal, to help you adjust your antenna to optimize signal
reception.
CableCARD
This list of selectable CableCARD options will vary,
depending on your cable service provider.
Option
Description
To go directly to
programming Timer 1 or 2,
press
instead of
pressing
b
.
z
To return to the Timer
Menu after programming one
of the Timers, press
when the highlight is in the
channel number field.
z
To return to the Timer
Menu after setting the
Current Time
, press
when the highlight is in the
minute field.
z
AX1X_Digital.book Page 98 Wednesday, March 2, 2005 1:13 PM
