84
KDL-32XBR6/37XBR6
KDL-32XBR6/37XBR6
NOTE: Les composants identifi es per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
NOTE: The components identifi ed by shading
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
4-3. CONNECTORS
101
1-835-266-11
LEAD WIRE WITH CONNECTOR (LVDS)
(KDL-32XBR6
ONLY)
101
1-835-267-11
LEAD WIRE WITH CONNECTOR (LVDS)
(KDL-37XBR6
ONLY)
102
1-910-043-81
CONN ASSEMBLY, 13P
103
1-910-043-82
HARNESS ASSEMBLY, 30P
(KDL-32XBR6
ONLY)
103
1-910-043-85
HARNESS ASSEMBLY, 30P
(KDL-37XBR6
ONLY)
104
1-910-043-80
CONN ASSEMBLY, 14P
(KDL-32XBR6
ONLY)
104
1-910-043-83
CONN ASSEMBLY, 14P
(KDL-37XBR6
ONLY)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
2-580-629-01
SCREW, +BVST 3X8
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure”
on Page 34 for KDL-32XBR6 and Page 48 for KDL-37XBR6.
101
104
102
103
INV
Power Unit
T-CON
H4
SP
SP
BU
1411
3201
CN4700
CN2001
CN602 (32)
CN602/603 (37)
CN601
BLOCK SWITCH
H3E
