19
KDL-32XBR6/37XBR6
KDL-32XBR6/37XBR6
1
2
Balancer
(ETC- Inverter MT) Board
LCD Panel
Inverter Board Cover
SHIELD REMOVAL
NOTE:
Disconnect the 8
Inverter Board Connectors
and the LVDS Cable
before removing the Inverter Board.
REMOVE SCREWS
SECURING
SHIELD
1-10. ETC- INVERTER MT BOARD REMOVAL (KDL-37XBR6 ONLY)
1 Remove 6 screws from Board Cover
2 Disconnect 8 balancer connectors
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure”
on
Page
48.