− 10 (GB) −
Installing the TV on the wall
1
Connect the necessary cable(s)
to the TV.
Make sure to connect the cables before
installing the TV on the wall. You will be
unable to connect the cables when the TV
is installed.
Refer to the Operating Instructions
supplied with your TV.
Note
Subcontract the cable routing in the wall to a licensed
contractor.
Bundle the connecting cables to prevent stepping on
them before wall mounting.
2
Install the TV onto the Base.
For the location of the Pulleys
to the
hang on the Base, refer to the table of
step 3 in “Deciding on the installation
location” on page 8.
Hold the TV securely with both hands
and gently hang the Pulleys
attached
to the rear of the TV to the Base, making
sure to confirm the shape of the holes.
After installing the TV on the wall,
confirm the Pulleys
are firmly latched
into the Base.
2-a
2-b
WARNING
Be sure that two or more persons hold the TV when
carrying it.
3
Preventing the bottom of the TV
from shifting.
Take up the slack of Belt
and attach it
to the wall tightly.
2-a
2-b
Use a 5 mm diameter screw or
equivalent (not supplied).
Note
Try to pull the bottom of the TV forwards yourself
slightly, to make sure that it does not move forward.
If there is any movement, it is not fixed correctly, and
the Belt
should be secured firmly again.
