− 8 (GB) −
Refer to the below table about
the Base Adaptor fitting
location. In case of selecting
2-b, then skip this step.
Model Name KDL-
Hook location
49WD75
b
43WD75
32WD75
a
d
b
c
4
Decide the positions of the
screws for installing the Base
(20)
.
Refer to the specifications on page 11.
When selecting 2-a, please use the hole
positions of Base Adaptor
.
WARNING
The wall that the TV will be mounted on should be
able to support a weight of at least
four times
that of
the TV (Refer to your TV’s Operating Instructions for
its weight.).
Determine the strength of the wall the TV will be
mounted on. Reinforce the wall sufficiently, if
necessary.
Installing the Base on the
wall
Use four or more screws of 8 mm diameter
or equivalent (not supplied).
Fit four screws to the holes of Base
Adaptor
with Base (20)
(2-a only).
Install the Base (20)
on the wall
horizontally.
2-a
2-b
