KDL-32BX355/40BX455/46BX455 25
SECTION 5 - UPDATES AND ADJUSTMENTS
VIEWING THE STATUS INFORMATION
After replacing the Main Board, LCD Panel, or TCON Board, you MUST
UPDATE the SOFTWARE to the latest version. Verify the latest software is
installed before proceeding to the service adjustments.
3. Press until
Status
Information
is selected, then press
.
Main Micro
SW Version
SONY_2012_TOSCA_1.04
NVM Version:
1
Boot Version:
0.01
Panel Version:
V0.004
PQ Version:
V1.00b
AQ Version:
AQ1.001
4. Verify the latest software version is installed.
5. Do one of the following:
a. If the latest software is installed, proceed to
Adding the Serial
Number
.
b. If the latest software is not installed, update the software and
then proceed to
Adding the Serial Number
.
ADDING THE SERIAL NUMBER
Verify before proceeding to the next step:
;
Verified Status Information
1. TV must be in Standby mode. (Power On).
2. Press the following buttons on the Remote Commander within a
second of each other:
MUTING
MUTING
Volume
+
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
50
]>
Panel Selection
<[
T315XW04_V3
]>
SERIAL NUMBER EDIT
1322132
MODEL NAME EDIT
KDL-32BX355
[</>]Set [Menu] Exit
Service Mode
3. Press until
Serial
Number
Edit
is selected, and then press
.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
50
]>
Panel Selection
<[
T315XW04_V3
]>
SERIAL NUMBER EDIT
<[
1
3 2 2 1 3 2
]>
MODEL NAME EDIT
<[
KDL-32BX355
]>
[</>]Set [Menu] Exit
Service Mode
