KDF-46E3000/50E3000
KDF-46E3000/50E3000
30
HCE BLOCK ASSEMBLY
191003665
HARNESS ASSY
HARNESS ASSY MUST BE INSTALLED BEFORE
PUTTING INTO HC BRACKET
Ensure connector is routed so that it does not go
above red line shown above.
Dress to wire holder installed on HCE Board.
Route HARNESS ASSY THROUGH
OPENING IN THE REAR COVER
Dress to wire holder
on FAN BRACKET
Install on [U] board as shown. Connector
should be above 3P Connector
Dress to Wire Holder on Terminal Bracket.
46" Models must be looped to take up excess slack
50" Models DO NOT need to be looped
Correct Routing
of HC wire