5
Inside
a
Connector dedicated to WLAN (Wireless LAN
terminal)
Attach a separately sold Sony product; USB Wireless LAN
Module IFU-WLM3 (hereafter WLAN module).
Use the module to view the angle adjustment when
installing the camera.
Notes
• When the WLAN module is mounted, the wired LAN is
not available.
• Using a device other than the specified devices may
cause a failure or malfunction.
• Do not attach the dome casing while attaching the
module to the connector.
• When using WLAN, use the camera at an outside air
temperature between 0°C to 40°C.
b
SD OFF switch
By pressing the switch, the SD memory card can safely be
removed.
Note
After turning off the SD MOUNT indicator, the SD
memory card can be removed.
c
SD card slot
This slot is used for separately sold SD memory cards.
Image data in the camera can be recorded to a memory card
by inserting it into the slot.
Align the notch of the memory card with the mark, and
gently insert the memory card to the slot until it clicks into
place.
This unit is compatible with the memory cards of SDXC
and SDHC standards only.
Note
For inquiries regarding verified SD memory cards, contact
your authorized Sony dealer.
d
SD MOUNT indicator
When mounting the SD memory card, the indicator lights
up.
e
Camera unit
f
Camera unit mounting screws (four
positions)
Make sure to tighten the screws securely when installing
the camera.
g
24 V
/ 12 V
(power input) connector
Connect the power input cable in the supplied multi
connector cable.
h
Camera block fixing screw (tilt) (one position)
First, point the camera block in the desired direction, then
tighten the screw to secure in place.
i
f
TOP mark
Indicates the image direction.
j
Reset switch
To reset the camera to the factory default settings, hold
down this switch with a pointed object and supply power
to the camera.
k
AUDIO EXT CTRL (external control input/
output) connector
Connect the AUDIO and I/O cables in the supplied multi
connector cable.
5
6
7
8
9
q;
qa
qs
1
qh
2 3
4
qd
qf
qg
Infrared LED
