Sony IPELA PCS-TL30, Quick Start Manual

Page: 25 / 125

25
Names and Functions of Parts
Connector panel
(section behind rear cover, seen from
below)
a
DC19.5V connector
Connect the supplied AC adapter PCS-AC19V6A or
PCGA-AC19V7 here.
b
AUDIO IN (PC sound input) jack (stereo mini
jack)
Connect this jack to the audio output of a computer
connected to the RGB IN connector.
c
RGB IN connector (15-pin mini D-sub connector)
Connect the RGB output of a computer here.
d
100BASE-TX/10BASE-T port (RJ-45)
Use a Category 5 LAN cable to connect this port to a hub
or similar equipment.
This port is equipped with a Link/Data indicator (green)
and a 100/10 Mbps indicator (orange).
e
PC port
This connector is used when the same mouse is to be used
for the PCS-TL30 and for a computer connected to the
RGB IN connector. Link the connector to a USB port on
the computer.
Do not use a USB cable that is more than 3 m (9.84 ft.) in
length.
f
RS-232C port (9-pin D-sub connector)
This connector is used only for servicing the system.
g
Mouse port
Connect the supplied optical mouse PCS-RMU1 here.
Indicator Names and Functions
* The indicator is lit while the system is starting up. If abnormal temperature
is detected, the indicator flashes and power turns off.
Note
7 6 5 3 4 2 1
Indicator Status Meaning
(Power) *
Lit green Power is on
Lit orange Standby
Flashing orange (1-
second cycle) Problem with fan
Out Power is off
Online * Flashing blue
(3 times per sec.) Sending/receiving
Blue illumination lit Communication in
progress
Blue intermittent
flashing Missed call indication
Out Offline (no missed call) or
standby
(PC) *
Lit blue Computer display
Lit white Videoconference display
Out Standby
(Videocon
ference) *
Lit blue Videoconference display
Lit white Computer display
Out Standby
(Mic off) *
Lit orange Mic off
Lit white Mic on
Out Standby
(“Memory
Stick”)
Lit orange Accessing “Memory Stick”
Out Not accessing “Memory
Stick”
Tally lamp Lit orange Camera image being sent
to remote party (lens
cover open)
Flashing orange
(5-second cycle) Closed image being sent
to remote party (lens
cover close)
Out Camera image not being
sent
Link/Data Lit green Link is established
Flashing green Data is transferring
Out Link is offline
100/
10 Mbps Lit orange 100 Mbps
Out 10 Mbps