80
Starting a Communication by Calling a Remote Party
The launcher menu is not displayed during communication or when “Launcher
Display” is set to “Off”on the“Launcher Screen” page of the General Setup
menu. To display the launcher menu in these cases, press the MENU button on
the Remote Commander.
To turn off the displayed launcher menu, press the MENU button again.
Audio:
Audio input
The audio input on the local system is shown
according to the settings in the Audio Setup menu.
When “Input Select” in the Audio Setup menu is
set to “MIC”, one of the following indicators is
shown to identify the microphones selected with
“AUDIO IN” in the Audio Setup menu:
MIC:
Sound from external microphones connected
to the AUDIO IN MIC connectors.
A1/A3:
Sound from the PCS-A1 or PCSA-A3
microphones connected to the MIC A1/A3
jacks.
EC-MIC:
Sound from the PCSA-A7 Echo
Canceling Microphones connected to the MIC
EC-MIC(A7) jacks.
When “Input Select” is set to “AUX”, one of the
following indicators is shown to identify the
external equipment selected with “AUDIO IN”:
AUX1:
Sound from external equipment connected
to the AUDIO IN AUX1 connectors.
AUX2:
Sound from external equipment connected
to the AUDIO IN AUX2 jacks.
HD SDI 1:
Sound from external equipment
connected to the HD-SDI 1 connector.
HD SDI 2:
Sound from external equipment
connected to the HD-SDI 2 connector.
When “Input Select” is set to “MIC + AUX”, the
indicator, for example “A1/A3 + AUX2” is shown
to indicate that both the sound from the
microphones and that from the external equipment
are input.
Audio level
metert
Shows the audio input level.
Displaying the Launcher Menu During Communication
Indicator
(icon)
Identification Description
