42
Registering Local Information
Page 2/4
HD-SDI 1 Input Channel
Allows you to select the audio channel input
from VIDEO IN HD-SDI 1 (MAIN
CAMERA) connectors from among CH 1/2
(channel 1, 2), CH 3/4 (channel 3, 4), CH 5/6
(channel 5, 6) and CH 7/8 (channel 7, 8).
HD-SDI 2 Input Channel
Allows you to select the audio channel input
from VIDEO IN HD-SDI 2 (SUB
CAMERA) connectors from among CH1/2
(channel 1,2), CH 3/4 (channel 3,4), CH 5/6
(channel 5,6) and CH 7/8 (channel 7, 8).
HD-SDI Output Channel
Allows you to select the audio channel
output from VIDEO OUT HD-SDI
connectors from among Off (no output
signal), CH1/2 (channel 1,2), CH 3/4
(channel 3,4), CH 5/6 (channel 5,6) and CH
7/8 (channel 7, 8).
Reversed MIC Inputs
Allows you to select whether to trasnsmit the
audio input from the microphone with right
and left reversed. If you select “On”, you can
match the right and left of the camera image
and the audio.
On:
Outputs the audio with right and left
reversed.
Off:
Outputs the audio with right and left not
reversed.
Page 3/4
Echo Canceler
Allows you to select whether to use the echo
canceler.
On:
Enables the echo canceler.
Off:
Disables the echo canceler.
The echo canceler is effective for the
microphones connected to the AUDIO IN MIC
connectors or MIC A1/A3 jacks.
Audio Output Delay Setting
Allows you to set Audio Output Delay to
synchronize the audio with the video output.
Default –100ms:
Selects the default delay –
100ms.
Default –50ms:
Selects the default delay –
50ms.
Default:
Selects the default delay.
D 50ms:
Selects the default delay
+50ms.
D 100ms:
Selects the default delay
+100ms.
Custom:
Selects when to use the Audio
Output Delay you set.
Audio Output Delay
When you set the “Audio Output Delay
Setting” to “Custom”, you can set the delay
time of the output audio to match the image
and the audio.
Recording Mute
When you connect an audio recording
device to record and playback the audio, the
recording mute function prevents echo from
affecting remote sites during recording. This
is only available when “Input Select” is set
to “AUX” or “MIC + AUX”.
On:
Enables the recording mute function.
Off:
Disables the recording mute function.
Audio Setup
2005.12.28 12:34
2/4
HD-SDI 1 Input Channel
Page:
HD-SDI 2 Input Channel
Cancel
Save
CH1/2
CH1/2
HD-SDI Output Channel
Reversed MIC Inputs
Off
Off
Note
Audio Setup
2005.12.28 12:34
3/4
Echo Canceler
Page:
Recording Mute
AUX Local Monitor Out
Cancel
Save
Off
Audio Output Delay Setting
Default
Audio Output Delay
Off
Off
REC OUT Mode
Stereo
