146
Select a tool
Select a tool
By clicking a tool button on the top part of the page, you can jump to the
corresponding tool page. A brief introduction of each tool is presented below.
[Controller]
Controls the PCS-HG90 using the on-screen controller, or controls using the
on-screen Remote Commander in the same manner as you do with the PCSA-
RG1 Remote Commander.
[Dial/Disconnect]
Calls a remote party, or ends a meeting.
[Phone Book]
Displays the dial list.
Connects from the dial list.
Registers, confirms or edits the dial list.
For a private phone book, the “Phone Book” button changes to the
“Private Phone Book” button.
[Setup]
Confirms or modifies the setup.
Sends messages.
Erases the saved values or information (only when “sonypcs” has been entered
as the user name).
[Info]
Displays the connection status, line status, or other machine information.
Displays the “Cause Code.”
Displays the “Call Log”(only when “sonypcs” has been entered as the user
name).
[Monitor]
You can monitor the image of PCS-HG90.
When “Web monitor” of the Administrator Setup menu is set to “Off”, you cannot
monitor the image.
Note
