Installation
11
2
Lift the unit, fit the inner rails into the slide rail
grooves (white), and then slide the assembly until it
stops.
3
As you pull the green tab inward to release the lock,
slide the unit as far as it can go.
4
Use the supplied round head screws to secure the
unit to the rack.
Connecting the Power Cord
Connect the power cord to the power supply connector.
Attach the safety clip to prevent the power cord from
disconnecting.
Note
• When using the unit in combination with multiple
NSR-1000 series or other NSRE-S200, make sure that
the power supply is sufficient.
• For details on the current consumption and inrush
current for the NSRE-S200, see “Reference Data for
Installation” (page 8).
Inner rail
Green tab
Round head
screw
