49
Configuring Camera Operations
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
3
Configure each item.
1
Select a protocol in accordance with the settings of
the analog camera.
2
Enter the control number configured for the analog
camera selected in the tree.
3
Click [Apply].
Controlling the pan, tilt, and zoom on the analog
camera becomes possible.
Make sure that the serial port is configured according
to the analog camera you are using. You can configure
the serial port from the Setup Menu of the
Administration Menu.
Configuring Network Camera
Control
You can configure settings to control pan and tilt speed
based on the zoom level of the camera.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the network camera, and click the [Control] tab.
3
Select the [Auto Pan & Tilt Speed] check box, and
click [Apply].
Pan and tilt speed will be controlled based on the zoom
level of the camera.
Configuring Audio
Configure settings for monitoring audio from the cameras.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera for which to enable audio, and click
the [Audio] tab.
Note
12
3
Summary of Contents for IPELA NSR Series
Page 137: ......