Sony IPELA NSR Series, User'Smanual, Page: 36 / 137

36
Registering Devices
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
Changing Registration Details
This section describes the procedure for changing the
settings on the [General] tab of the Device Configuration
screen.
The items on the [General] tab allow you set multiple
cameras simultaneously.
Some of the setting items differ depending on whether you
are configuring the settings of one camera or the settings
of multiple cameras simultaneously.
• A blank is displayed for setting items with which the
setting state differs for each camera. If these setting
items are saved as is, the corresponding setting items of
each camera are not modified. Reselecting an item from
a list or entering a numeral sets the new value for all of
the cameras.
• If a common value cannot be set for multiple cameras,
that setting item is unavailable. Change the combination
of cameras to select, and then configure the setting.
1
Select the camera(s) you want to change the
registration details of on the Device Configuration
screen.
You can also select multiple cameras at once by
holding down the Shift key or Ctrl key while selecting.
The camera registration details appear.
2
Click the [General] tab, and modify the settings of the
items you want to change.
For details on each of the items, refer to “Setting Items
of the [General] Tab” (page 39) .
For details on Generic Camera, refer “Settings
Required when Using SNC-CS20/CM120/DS10/
DM110/DS60/DM160” (page 37)
.
3
After configuring each item, click [Apply].
The settings are changed.
Deleting Devices
1
Select the camera you want to delete on the Device
Configuration screen.
You can also select multiple devices at once by
holding down the Shift key or Ctrl key while selecting.
2
Click (Delete).
A confirmation message appears.
3
Click [Yes].
The device is deleted.
• When a camera is deleted, “No Camera” is displayed in
the monitoring window in the layout. In the case of the
default layout, a camera is assigned to the empty
monitoring window the next time a camera is registered.
• If you delete a camera, you will no longer be able to find
data recorded under the name of that camera. The
recorded data is not deleted at that time. The recorded
data becomes target for deletion at the point in time
when the criteria for deleting the recordings or
overwriting the data in storage are met. For details, refer
“Configuring Settings Related to Storage” (page 70) .
Note
Caution